Notice is hereby given that sealed proposals will be received by the District Board, Carmel Area Wastewater District.
Bids shall be received at the District office: 3945 Rio Road, Carmel, CA. 93923
Bid shall be received no later than: 2:00 P.M., Tuesday, June 29th, 2021
Carmel Area Wastewater District (CAWD) proposes to conduct rehabilitation of several areas of the wastewater treatment plant to maintain the facilities in good operating condition. The project involves replacement of select electrical and mechanical equipment with in-kind or substantially similar equipment. The new equipment will be installed to serve the existing Influent Pump Station, Headworks, Chlorination Building, and Effluent Pump Station. Not all equipment in these areas is being replaced, and no changes are being made to the existing building structures. The project also includes demolition of three existing sludge tanks and a small storage building, and the installation of one new sludge tank in the location of one demolished tank. The new tank storage capacity will be about 75,000 gallons. The three sludge tanks being demolished are about 70,000 gallons, 188,000 gallons, and 70,000 gallons respectively.
Engineers Estimate: $7.9 Million
Carmel Area Wastewater District is inviting you to a scheduled Zoom meeting.
Please take an additional 5 minutes prior to start of meeting to download Zoom
- All participants will be muted at the start of the meeting. If participants have a question please use the chat section. All participants have access during the meeting to be recognized and utilize the platform to speak. Please use the virtual "raised hand" to be acknowledged.
Topic: Pre-Bid Meeting WWTP Elec/Mech Rehab & Sludge Holding Tank Project
You are invited to a Zoom webinar.
When: June 2, 2021 02:00 PM Pacific Time (US and Canada)
Steps to join the webinar:
- Please click the link below to join the webinar: Click to join the June 2, 2021 Pre-Bid Meeting
- Dial by telephone to either of the following numbers: 1 (669) 900-9128 or 1 (346) 248-7799
Webinar ID: 860 9184 2942
How to join a Zoom meeting tutorial:
Specifications and proposal forms may be secured at no charge by emailing the District’s Plant Engineer at firstname.lastname@example.org and requesting the documents.